Tutorial: Startup Captain Sim 757 from Cold and Dark
November 16, 2011
Here another video where I will show you how to startup the Captain Sim 757 from cold and dark. How to create a cold and dark cockpit? Start flight with default cessna, switch the engine, electrics and masterswitch off. Start your Captain Sim 757 and it will be Cold and Dark. (some switches are still on but they are always switched on). Thanks for watching and please subscribe, comment and rate!
Comments
25 Responses to “Tutorial: Startup Captain Sim 757 from Cold and Dark”
Got something to say?
@xXR33D3M3RXx I don’t know what causes the problem. This tutorial works and so it should work for you as well. Try a reinstall and make sure you follow the steps in this tutorial very well, I don’t know what else I could do. Otherwise you have to go to the support forums
@FS2004AviationPro i have the legal proper version of the aircraft and FSX
@xXR33D3M3RXx Do you mean that really everything was still turned off? Do you have a legal and proper version?
Would you happen to know any websites where I can get the new United Airlines paint-job for FS2004? I’m looking for the newest one, from after the United-Continental merger. I can’t stand flying around with the old paint-job!
@FS2004AviationPro i tried that but it didnt change anything. the engines still were on, as well as the instruments ?
@xXR33D3M3RXx ? The answer is in the video!
how do you start at the gate with the engines off, please help me !!!!
@FS2004AviationPro
Ah! There we go! Haha! Yes, KNOW you can tell them=)
@BlackFoxFalcon Ah! Thanks for letting know. Now I can say to the people where “It doesn’t work” ,that it DOES work very well
Excellent tutorial. It work well with my 757=) Thank you Sir!
@charlie75125 Yes, read the manual for more info as I can’t explain all the time on YouTube how the airplane works. They didn’t make the manual for nothing
ok so is that the cdu
@charlie75125 Turn the autopilot on and select a horizontal navigation mode like Heading Select or LNAV (you have to instert a route in the Flight Management Computer in order to be able to use LNAV.
how to i keep the plaine straight when in the air
@charlie75125 1- use HDG select (read manual, cause there’s also LNAV) 2- Configuration manager or standard Flight Sim “Fuel & Payload 3- Active Camera 2004
hi how which key do i press to keep the straight when in the air so that it doesnt keep turning also how do i load up passangers. how do i walk around the plane ?
@FS2004AviationPro ik hoorde het al
@Krap1105 Yep
nederland?
@markajones83 Maybe, I’ll think about it
Thanks m8 for awesome tutorial helped a lot. Any chance of CDU tutorial in landing this bird (ILS) cheers
i have the blank screens aswell, i even had engines and apu started and there was no discharge status on the battery? any one got any ideas?
And also its strange cuz after just starting APU In the 777 from cold and dark they all go on the screens…
Yes its aligned i think, i can uoload a video showing everything i did if you want?
@flightsimmerpro90 IRS fully alligned?