Part 2 – Phoenix Hardwood Floor Installation – Phoenix Hardwood Flooring Installation
January 25, 2012
Part 2 www.azhomefloors.com We had a hardwood floor installation using a 4″, 5″ and 6″ engineered wood on diagonal. This second video shows some of the installation, spreading wood flooring adhesive, along with an explanation of why certain aspects of the wood flooring adhesive are critical…
Comments
7 Responses to “Part 2 – Phoenix Hardwood Floor Installation – Phoenix Hardwood Flooring Installation”
Got something to say?
Hi, the adhesive I recommend is “Mapei Ultrabond Eco 995.” Remember though, the glue can only function as good as the subfloor it’s being installed over. Your subfloor, whether that would be wood or concrete,should not vary beyond 3/16″ in 10 linear feet, which is the maximum out of tolerance allowed. If you need to level your floor use? “Mapei Ultraplan 1 Plus,” with “Primer L.” These leveling products are designed to be used with the “Mapei Ultrabond Eco 995″ adhesive.
Hey Guys, I love? your work. Im about to do this myself. Quick question? What adhesive do you recommend? Thanks
That is so flattering! Thank you for considering us to install for you. Darn it! It takes so much equipment that we don’t usually drive more than 200 miles from Phoenix, AZ. Perhaps you might check your local Better Business Bureau to see if there’s? anyone nearby with a great rating. In fact, that will probably be the only way not to get fooled. Good Luck!
CAN YOU DO MY HOME ORLANDO…..24,000 SQ? FT….I LOVE HARDWOOD FLOORS
I always appreciate those compliments! Thanks for recognizing that we go the? extra mile.
great install? guys!!!! all the right steps…. good on you!!
where can one get that diagonal cutter for the? floor boards